Makita HR4013C 6KG Rotary Demolition Hammer

Features

One touch sliding chuck for easy bit installation and removal.
Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage.
"Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body.
Unrivalled low level of vibration aided by vibration absorbing housing.
LED service light indicates when to replace carbon brush.
In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications.

Specification

Impact energy 8.0 J
Max in concrete 40 mm
Impacts per minute 1450 - 2900 ipm
Input Wattage 1000 w
Vibration K factor 1.5 m/sec²
No Load Speed 250 - 500 rpm
Vibration: Chiselling 4.5 m/sec²
Vibration: Hammer Drilling 5 m/sec²
Net weight with pipes 6.8 kg

Standard Equipment

Side handle
Depth stop
Bit grease
Carry case

Warranty