Makita HR3210C 5kg SDS Plus Rotary Hammer

Makita HR3210C 5kg SDS Plus Rotary Hammer

Voltage
Please select from the options above.
Quantity
-
+

hr3210c_action.jpg


Features


Powered by an 850watt motor and generating 6.4 joules of impact energy and with up to 3,300 blows per minute available, the new Makita HR3210C AVT will punch a 32mm hole into concrete and drive a 90mm CT core cutter. This 3-function machine provides rotary-only operation for drilling with a no load speed of between 315 and 630rpm. Rotary action with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and demolition work. The HR3210 has a variable speed control and is fitted with a torque limiter device that instantly disengages the drive should the drill bit or core snag during operation. This action protects both the operator from physical injury and the machine from mechanical and electrical overload. Two unique Makita features contribute to the super-safe, low vibration benefits of this new, advanced machine. The patented Makita, AVT Anti Vibration Technology system uses the pneumatic pressure generated in the hammer piston chamber to move a counter balance in the opposite direction to dampen out the impact vibrations at the steel point. This dramatically reduces machine produced vibrations. In addition to the advanced AVT system, this new Makita 5kg hammer features the 2-Mass fulcrum hinged rear grip handle andthe vibration damping side handle to further limit HAV risks. This new, heavy duty Makita hammer has an ultra low vibration rating of just 7.5m/s2 in hammer mode and 10m/s2 in drilling mode.


Specification


Max In Concrete: 32mm
Max Core Diameter (TCT): 90mm
No Load Speed: 315-630rpm
Blows Per Minute: 1,650-3,300bpm
Joules: 6.4Js
Vibration: RH:10m/Sec HO: 7.5m/Sec
Input Wattage: 850watts
Net Weight: 4.9kgStandard EquipmentBit Grease
Depth Rod
Side Handle
Carry Case

Warranty


12 months


 


 


 

Please select a product to add a review to.