HMT VersaDrive Oversized Galv ImpactaTap M6 x 1.0mm
£34.02
£28.35
Stock Code
HMT308020-0060
15X FASTER THAN HAND TAPPING
VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings.
VersaDrive ImpactaTaps perform best when adapted for use with an Impact wrench for through holes. However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use
Chipbreaker action for Automatic chip clearance when Impact Tapping
Unique Dual-Point Starting Angle for easy alignment and fast cut
High Grade Tool Steel with Ground Flutes for high accuracy & long life
High Strength, Non-slip Shank Design
VersaDrive ImpactaTaps for Galvanised Bolts have an oversized thread to compensate for the increased thickness of coating found on galvanised steel fabrications or galvanised fixings.
VersaDrive ImpactaTaps perform best when adapted for use with an Impact wrench for through holes. However, they can also be adapted for use in a reversible Magnet Drill, or even used with any standard Hand Tap wrench.
Fast Tapping with Minimal Kickback; Specially hardened for Impact Wrench use
Chipbreaker action for Automatic chip clearance when Impact Tapping
Unique Dual-Point Starting Angle for easy alignment and fast cut
High Grade Tool Steel with Ground Flutes for high accuracy & long life
High Strength, Non-slip Shank Design
