There is often some confusion as to the differences between a brad nailer and a finish nailer. Both of them look quite similar, which explains the confusion, however, that doesn’t make them interchangeable. Certainly, brad nailers do look like smaller framing nailers, however, they do have different application uses, so you must choose the right tool for the job. To make your life easier, we’re going to clear up some of the confusion by examining both the brad nailer and finish nailer to understand them better. By the end of this article, you should have a clearer idea as to:
Let’s get stuck in!
So, what is a brad nailer? Well, the brad nailer was introduced after the finish nailer, with the simple focus of providing a nailer that can shoot thinner nails (the brad nailer typically uses 18-gauge nails). As such, you’ll want to use a brad nailer only on the smaller applications where you might be worried about splitting the wood, or that the size of the nail might be too large. The fact is, any nail will leave a hole in the wood, so you’ll want to opt for a nail that isn’t going to leave too big of a hole. A brad nailer using 18-gauge will certainly create a reduced hole size, thus leaving less of a mark on the woodwork. And the best part is that depending on the materials that you are working with, you might not need to fill any holes before painting, allowing you to work faster and without delay.
Brad nailers are most commonly used for the following tasks:
OK then, so what are the pros and cons of using a brad nailer? Let’s take a closer look… Brad nailer pros:
Brad nailer cons:
So, what is a finish nailer? For one thing, people often get confused by the term ‘finish nailer’, as it is a term often used to describe nailers that range from 15 to 18-gauge nail size. The primary difference that you should be aware of, between a finish nailer and a brad nailer, is simply the gauge of the nail. Finish nails are much thicker (15 / 16-gauge), whereas brad nailers only use 18-gauge. Don’t worry too much about the terminology used, however, as it can be misleading. The main difference ultimately comes down to gauge size for the fasteners that each of the power tools are designed to use. Another feature of the finish nailer is that they can create a much stronger hold. You can use a finish nailer for putting together cabinets, crown moulding, and heavy baseboards to name a few. These are tasks that simply cannot be completed with a brad nailer, so be mindful. In addition to that, a finish nailer comes available in two different designs: angled and straight—the key difference being that angled finish nailers are easy for using in tight spaces. Thus, depending on the type of project you are working on, an angled finish nailer might be more appropriate. Aside from angled and straight design, finish nailers can also come in pneumatic and cordless versions as well. The pneumatic tools are certainly much more powerful, whilst being significantly lighter—ideal if you already have an air compressor in your workshop. Otherwise, a cordless finish nailer will certainly be able to get the job done. Then again, it all depends on the type of work that you are carrying out. For example, if you’re working up a ladder, the last thing you need is to be trailing a cable behind you.
So, what are finish nailers most commonly used for? Here is a list of some tasks that a finish nailer is ideally suited for:
So, what are the pros and cons of using a finish nailer power tool? Let’s take a closer look… Pros of using a finish nailer:
Cons of using a finish nailer:
And that about sums it up. A brad nailer is the lighter of the two, better suited to smaller and more intricate tasks. A finish nailer, on the other hand, should be seen as the heavy-duty nailer that is ideal for larger tasks with thicker materials. Take the time to think about the type of tasks that you will be carrying out. If your work is more heavy-duty, then a finish nailer will be a great investment. Otherwise, you can’t go wrong with a brad nailer.