Hitachi C8FSE 8" Slide Compound Mitre Saw
This saw can stand up to job-site travel and tough high-volume tasks, while retaining the accuracy suitable for fine woodworking and finish work. Hitachi’s thumb-actuated positive stops allow for quick adjustments to the most common miter angles- 15°, 22.5°, 31.6°, and 45° to both the left and right. A bevel range of 48° to the left and 5° to the right allow for precise compound cuts.
A pivoting section extends the length of the fence and a large table provides a stable guide and sturdy support. Materials are held firmly in place with a table-mounted clamp for efficiency, accuracy and safety. This saw can handle materials up to 2-9/16-inches high, such as crown molding lying flat, and 12 inches deep in a 90° cross cut.
The C8FSE is loaded with features for user convenience, including the best-in-class dust collection system for a cleaner workspace. The vertical handle is covered in Hitachi’s vibration absorbing elastomer for a secure and comfortable grip surface. A splinter guard behind the fence reduces tear-out for clean, finished cuts and easily accessible carbon brushes will help your saw perform for years to come.
Twin horizontal rails give a maximum cutting width of 312mm
Left bevel cutting up to 48°Lightweight design
Soft grip handle
Blade Diameter 216mm
Bore Size 30mm
No-load Speed 5500/min
Max Cross Cut 656x312mm
Max Mitre Cut 65x220mm
Max Bevel Cut 45x312mm
Max Compound Cut 45x220mm
2x 30 tooth TCT blades