About Data
Branch locations
Services
Products
Product Search
Latest news
Testimonials
Contact Us
|
Combination flush trimming & drilling bits
This bit drills its own hole for blind
routing in plywood and soft metals.
Eliminates fitting edges at window
and floor openings.
WITH PILOT
SUFFIX 1/2 = 1/2" SHANK,
SUFFIX 3/8 = 3/8" SHANK, OTHERWISE 1/4" |
|
Flush trimming bits carbide tipped with 2 bearings
This bit has been specially designed for
template work in softer timbers. Where a
single bearing might create an indentation
on the timber, this bit has double the
surface area to ensure template surface
is not damaged.
CARBIDE TIPPED - TWO FLUTE
WITH DOUBLE BALL BEARING GUIDE
SUFFIX 1/2 = 1/2” SHANK,
OTHERWISE 1/4” |
|
Overhang trimming bit
This bit will leave a 1/8" overhang in
order that the final flush trimming cut
is a light one for the smoothest
possible finish.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
6.35 mm (1/4") SHANK |
|
Inverted flush trimming bits
A handy bit for copy work where
the template is between the work
and the router.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2"SHANK,
OTHERWISE 1/4" |
|
Combination flush & bevel trimming bits
A versatile bit with ball bearing guide. By adjusting the depth this bit will either flush trim or bevel trim.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
6.35 mm (1/4") SHANK |
|
Professional range - 3 flutes
For extra smooth trimming.
Assembly includes 3 flute cutter,
bearing, arbor, spacers and nut.
FLUSH AND BEVEL
TRIMMING ASSEMBLIES
SOLID CARBIDE - THREE FLUTES
WITH BALL BEARING GUIDE
6.35 mm (1/4") SHANK |
|
High performance professional range - 4 flutes
These tools produce a chatter-free trimmed
edge. At high feed rates they produce a superior
finish to any other tool. Assembly includes 4 flute
cutter, arbor (1/4" or 1/2"shank),
bearing, nut and washer.
FLUSH AND BEVEL
TRIMMING ASSEMBLIES
CARBIDE TIPPED - FOUR FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2"SHANK,
OTHERWISE 1/4" |
|
Double flush and bevel trimming assemblies
A time saving bit that will trim both sides of the
board in one pass. Washers provided enable
cutters to be separated the correct distance
to suit thickness of board to be trimmed.
CARBIDE TIPPED - FOUR FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2” SHANK,
OTHERWISE 1/4” |
|
7deg bevel trimming bit
Provides 7° bevel to trim the
edge of plastic laminated
surfaces. Built-in pilot
eliminates guide assembly.
SOLID CARBIDE - SINGLE FLUTE
WITH PILOT
6.35 mm (1/4") SHANK |
|
Flush trimming bit
Makes square trim edge cuts.
Has integral pilot
SOLID CARBIDE -
SINGLE FLUTE WITH PILOT
6.35 mm (1/4") SHANK |
|
| |
Shopping Basket
Designed and hosted by Peter Gill and Associates