About Data
Branch locations
Services
Products
Product Search
Latest news
Testimonials
Contact Us
|
Palace pattern bits
An attractive edge mould for
table and bench tops.
CARBIDE TIPPED -
TWO FLUTE
WITH BALL BEARING
GUIDE
12.7 mm (1/2”)
SHANK |
|
Single reed bit
This bit will produce a single
bead on the edge of the
material.
CARBIDE TIPPED -
TWO FLUTE
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Double reed bit
This bit gives a combination of
two beads on the material.
CARBIDE TIPPED - TWO FLUTE
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Multiple reed bit
This bit gives a combination of four
beads on the material.
CARBIDE TIPPED - TWO FLUTE
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Classical combination bits
This combination bit, developed by Carb-I-Tool,
will cut a multitude of different shapes. Any part can be
selected, multiple passes will also increase variety
of shapes.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Multi form combination bits
With this combination bit the
number of standard mouldings
that can be produced is enormous. With multiple
passes and a little imagination any number of
beautiful mouldings can be produced.
CARBIDE TIPPED - TWO
FLUTES
WITH BALL BEARING GUIDE |
|
Rounding over bits ( bearing guided )
Gives extra smooth chatter free cuts
due to precise tool geometry.
Can be converted to a beading bit by
using bearing TB 9.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Round over fillet bits
These bits are very popular for table
and bench tops. Profiles are variable by raising or lowering the bit.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING
GUIDE
12.7 mm (1/2") SHANK |
|
Beading bits ( pin guided)
A decorative edge bit with pilot
for early American furniture
making.
TWO FLUTE - WITH PILOT
6.35 mm (1/4") SHANK |
|
Beading bits ( bearing guided)
This bit is the same as the rounding over
bit but has a smaller bearing leaving 1/16"
edge bead.
Can be converted to rounding over bit by
using bearing TB11.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK
OTHERWISE 1/4" |
|
Double beading bits
A decorative edge bead.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Triple beading bits
A decorative edge bead.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Beading ogee bits
Produces a decorative edge
moulding.
CARBIDE TIPPED - TWO FLUTE
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Cove bits ( pin guided )
Used for a drop leaf table
joints and decorative edges.
TWO FLUTE - WITH PILOT
6.35 mm (1/4") SHANK |
|
Cove bits ( bearing guided )
Up, sheer cutting angle
clears chips fast for chatter
free accurate routing.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Classical cove bits
A decorative edge moulding.
By fitting the optional TB11 ball bearing the
standard cove design can be achieved.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Double cove bits
Produces a decorative edge moulding.
By fitting the optional TB11 ball bearing a
cove effect can be achived.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Triple cove bits
Produces a decorative edge
moulding or any combination
of the three radii can be used.
By fitting the optional TB11 ball
bearing a different profile can
be achieved.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
12.7mm (1/2") SHANK |
|
Provincial bits type 1
Like so many of Carb-I-Tool’s router bits
this bit can be used as illustrated to
produce decorative edge mouldings
or by using the guide on your machine
many combinations of rounds and
covers can be achieved.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK
OTHERWISE 1/4" |
|
Provincial bits type 2
Like so many of Carb-I-Tool’s router bits
this bit can be used as illustrated to
produce decorative edge mouldings
or by using the guide on your machine
many combinations of rounds and
covers can be achieved.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK
OTHERWISE 1/4" |
|
Classical bits ( bearing guided )
This versatile bit produces a
very decorative moulding used
extensively on many furniture and
building applications.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Chamfering bits ( bearing guided )
A popular method of
removing sharp corners
for a professional finish.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Rebating bits ( bearing guided )
Has ball bearing guide for
mar-free finish. Replacement
bearing TB-11. By substituting
TB-9 bearing the depth of
rebate will be increased by
1/16" (1.6mm.)
CARBIDE TIPPED
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK
OTHERWISE 1/4" |
|
Bull nose radius bits
A time saving bit for rounding over
both sides of a board in one pass.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Canoe slat bits
These bits can be used with the above bull nose radius bits to produce joints. |
|
Drawing line bits
A popular mould. Common on old
style double hung windows, and architraves
CARBIDE TIPPED
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Stair handrail bit type 1
This bit will produce an attractive and functional hand rail
for balustrades. It can be
used in conjunction with
the half bull nose bit to
curve the top over.
This will produce an
optional profile.
12.7 mm (1/2") SHANK |
|
Stair handrail bit type 2
Profile on top of rail can be varied using
a half bull nose bit
CARBIDE TIPPED
- TWO FLUTES
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Half bull nose radius bits
A handy bit for finishing wider
timbers. The adjustment of
machine height gives a variety of
different forms.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Ogee bits ( with bearing )
These bits produce a
decorative form used
widely on table and
mantle edges. By
fitting the optional
TB9 ball bearing a
1/16" edge bead can
be produced as
illustrated.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK, OTHERWISE 1/4" |
|
Shallow roman ogee bits
This bit will produce a
decorative edge
moulding.
CARBIDE TIPPED -
TWO FLUTES
WITH BALL BEARING GUIDE
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Batten mould bit
A bit to enable production of batten
moulding for the fixing of cement
sheeting and other types of wall
panelling.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Table edge bit with return
This bit has a return to round
over bottom of table for an
attractive finish.
CARBIDE TIPPED - TWO FLUTES
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Double edge radius bit
This versatile assembly enables you
to round the top and bottom edges
of timber at the same time.
Assembly comes with bearing,
spacer and washers, which allow
you to cut up to 30mm material.
CARBIDE TIPPED - FOUR FLUTES
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
Table edge bit
A popular bit for finishing table edges.
CARBIDE TIPPED - TWO
FLUTES
WITH BALL BEARING GUIDE
12.7 mm (1/2") SHANK |
|
| |
Shopping Basket
Designed and hosted by Peter Gill and Associates