About Data
Branch locations
Services
Products
Product Search
Latest news
Testimonials
Contact Us
|
60deg vee groove bits
his bit is specifically
designed for sign and lettring work.
60° INCLUDED ANGLE
CARBIDE TIPPED
- TWO FLUTES
SUFFIX 1/2 = 1/2” SHANK, OTHERWISE 1/4” |
|
90deg vee groove bits
A versatile bit for decorative
vee grooves and chamfering.
Used for sign and lettering work.
Also mitre joints for box fabrication.
90° INCLUDED ANGLE
TWO FLUTES
CARBIDE TIPPED
SUFFIX 1/2 = 1/2" SHANK, OTHERWISE 1/4" |
|
Provincial design veining bits
For recess design veining in fine
cabinet surfaces.
Designed for template routing.
90° INCLUDED ANGLE
SOLID CARBIDE - SINGLE FLUTE
6.35 mm (1/4") SHANK |
|
Veining bits
For grooving and scoring panel
designs in wood surfaces such
as cupboard doors.
SINGLE FLUTE
6.35 mm (1/4”) SHANK |
|
Core box bits
For use in fluting flat surfaces
such as mantles and facades.
TWO FLUTE
SUFFIX 1/2 = 1/2”
SHANK, OTHERWISE |
|
Ogee bits
Used for panel doors and
decorative edge moulds.
TWO FLUTES
SUFFIX 1/2 = 1/2" SHANK,
OTHERWISE 1/4" |
|
Ogee bits fine point
For Ogee grooves where a fine point is required.
Used extensively in router lathe work.
CARBIDE TIPPED - TWO FLUTES
SUFFIX 1/2 = 1/2" SHANK, OTHERWISE 1/4" |
|
Ogee bits rounded bottom
Used for decorative plunge cutting,
grooving or edge
forming.
CARBIDE TIPPED -
TWO FLUTES
SUFFIX 1/2 = 1/2"SHANK, OTHERWISE 1/4" |
|
Ogee bits wide flat bottom
Designed for grooving panel doors
and decorative edge moulds.
CARBIDE TIPPED - TWO FLUTES
SUFFIX 1/2 = 1/2" SHANK, OTHERWISE 1/4" |
|
Classical bits
Used for panel doors and
decorative edge moulds.
CARBIDE TIPPED -
TWO FLUTES
SUFFIX 1/2 = 1/2"SHANK,
OTHERWISE 1/4" |
|
Traditional classical bits
Used for panel doors and decorative edge moulds.
CARBIDE TIPPED - TWO FLUTES
SUFFIX 1/2 = 1/2" SHANK, OTHERWISE 1/4" |
|
Beading bits
For grooving panel designs in wood surfaces
such as cupboard doors.
CARBIDE TIPPED - TWO FLUTES
SUFFIX 1/2 = 1/2"SHANK,
OTHERWISE 1/4" |
|
Beading bits wide flat bottom
Specially designed for grooving panel
doors. This bit produces a beading
groove with a wide bottom.
CARBIDE TIPPED - TWO FLUTES
SUFFIX 1/2 = 1/2"SHANK
OTHERWISE 1/4" |
|
Double beading bit wide flat bottom
Specially designed for grooving panel doors.
Also produces a decorative edge beading.
CARBIDE TIPPED - TWO FLUTES
SUFFIX 1/2 = 1/2" SHANK, OTHERWISE 1/4" |
|
Extended rounding over bits
This bit is used for rounding over edges in
areas where a ball bearing is not required.
It makes a decorative edge, or can be used to
plunge completely through the material.
CARBIDE TIPPED -
TWO FLUTES
SUFFIX 1/2 = 1/2" SHANK, OTHERWISE 1/4" |
|
Dish cut bits
This bit is used for routing trays,
bowls, plates and boxes. It has a
wide surface cut, to quickly
remove excess material.
CARBIDE TIPPED - TWO FLUTES
12.7 mm (1/2") SHANK |
|
| |
Shopping Basket
Designed and hosted by Peter Gill and Associates