This saw can stand up to job-site travel and tough high-volume tasks, while retaining the accuracy suitable for fine woodworking and finish work. Hitachi's thumb-actuated positive stops allow for quick adjustments to the most common miter angles- 15°, 22.5°, 31.6°, and 45° to both the left and right. A bevel range of 48° to the left and 5° to the right allow for precise compound cuts. A pivoting section extends the length of the fence and a large table provides a stable guide and sturdy support. Materials are held firmly in place with a table-mounted clamp for efficiency, accuracy and safety.

This saw can handle materials up to 2-9/16-inches high, such as crown molding lying flat, and 12 inches deep in a 90° cross cut. The C8FSE is loaded with features for user convenience, including the best-in-class dust collection system for a cleaner workspace. The vertical handle is covered in Hitachi's vibration absorbing elastomer for a secure and comfortable grip surface. A splinter guard behind the fence reduces tear-out for clean, finished cuts and easily accessible carbon brushes will help your saw perform for years to come.

Features

Twin horizontal rails give a maximum cutting width of 312mm
Left bevel cutting up to 48°
Lightweight design
Soft grip handle

Specification

Blade Diameter 216mm
Bore Size 30mm
No-load Speed 5500/min
Max Cross Cut 656x312mm
Max Mitre Cut 65x220mm
Max Bevel Cut 45x312mm
Max Compound Cut 45x220mm
Weight 14kg

Standard Equipment

24 tooth TCT blade
Dust bag
Vice assembly
Wrench

Warranty

12 months